键盘无法正常使用的一次解决经历（国外英文资料）.docVIP

键盘无法正常使用的一次解决经历（国外英文资料） 1, system optimization Settings System routine optimization 1) turn off the special effects in your system properties, which is a simple and efficient way to speed up the process. Click start to the control panel to the system, the advanced, the performance, the setting up to the visual effect, set to the best performance to determine. 2) my computer - attribute - advanced - error report - select disable error reporting. 3) order start and fault recovery - Settings, to write events into the system log, send alarm management, automatic restart the three box. Set the following write debug information to no. 4) the my computer - properties - the advanced - performance - Settings - advanced, the virtual memory value is set to 2.5 times that of the physical memory, the initial and maximum value is set to the same size (such as your memory is 256 m, you can set to 640 m), and the virtual memory Settings in this system. (note: when moving well to the original file deletion). 5) to my documents folder to the other partitions: right-click on the my documents - properties - mobile, set up outside the system disk partition. 6) transfer IE temporary folder to other partitions: open the IE browser, select tools - Internet options - normal - Settings - mobile folders, setting can be set up outside the system disk partition. Accelerate XPs open, shutdown 1) first, open the system properties dot advanced TAB, in the open start and fault recovery zone Settings, remove the two square root in the system start zone, if it is a multiple system users to keep show time list of the operating system). Click edit to determine the additional attribute of the boot item to/fastdetect instead of/nodetect, and do not add/noguiboot properties because guiboot is used later. 2) the next step is the key, in the system properties open hardware TAB, open the device manager and IDE ATA/ATAPI controller, double-click to open the secondary IDE channel attribute, point the advanced