冰水冷却中和-洗涤吸收法处理高温工业废气方法.pdfVIP

t 国良，等:冰水冷却中和呻洗涤吸收法处理高温工业废气方法 f巧伽. 技术交流 gl8SS 中图分操号:TQ171.9 文献标识码:A 冰水冷却中和一洗涤吸收法处理高温王业废气方法 曹国良，邢细文 (上海市环境科学研究院，上海 200003 ) 摘 费:介绍了冰水冷却中和…恍涤吸收法处理高温工业废气的方法脱理及冰水冷却中和单元、就涤吸收处理单元、f.i:水 处理单元、抽风系统等装置组成和工艺流程。以无碱玻璃纤维池窗拉丝生产绪高温含氟化物废气为例，进口烟气温度250 c 左右，氟化物浓度为200 mg/旷的废气绕过本方法处理后，温度降至44 C.氟化物浓度降至2.35 mg/I旷左右，去除率为98. 脯， 3 SÛ2进气浓度为1000 mg/m • 出口浓度为18.9 mg/旷，去除率均98. 1%. 均达到国家排放标准。 关键词g 高蝇工业成气:冷水冷却:洗涤吸收:达标排放 TREA:丁MENT OF HIGH TEMPERA:叽JRE INDUSTRlAL WAS丁EGAS BY ICE WATER COOL刑GAND SCRUBBING-ABSORPTION CAO Guoliang. XING Shaowen ( Shanghai Academy of Environmental Research , Shanghai 200003) Abstract: The principles. 叫uipment units and process flow for treating high tem阳圳股industrial waste gωby， ice 阴阳cooling and scrubbing-absorptíon are de阳ibed. As an example. tests wereω，nducted on the 阳喝阳ent of high tem阳mture fluoride- ∞ntaining Wi臼te gas 台om 巳glass fiber furnaces. The treatment of waste gas containing 200 mglm3 fluoride at an inlet 能mperature 3 of about 250 c by 也is me也od resulted in 能mpemture d阳ωseω44 C and fluoride content decrωseω 曲out 2.35 mglm • wi也 98.8% fluoride d叩leted. For SÛ2 depletíon. 1ωo mglm3 inlet SÛ2 was l\时ucedω18.9 mgl旷outlet SÛ2, with 98.1% SO:z d叩leted. Both emissíons reached the natíonal standard. Key words: hígh 阳n阴阳阳re indus时al waste g部; ícewa阳c∞ling; 阳ubbing呐sorp创on; emíssíon 叩tos阳伽rd 。前富 越来越严重。燃煤、燃油锅炉、各种工业炉窑、特 近年来，随着工业的发展，商温工业废气污染 定的化工产品生产，排放大量含有HF、 S02、 NOx，