水转印-Zuma.pptVIP

水轉印 水轉印技術 是利用水將帶彩色圖案的塑膠膜進行高分子水解並使之附著在工件上的一種印刷技術. 水轉印工藝操作步驟 預處理( Primer / Base Coat) 活化 (activator) 轉印 (Dipping Transfer) 水洗 (Washing) 乾燥(Drying) 噴面漆 (Top Coat) 再乾燥(Drying) 預處理 活化 轉印 水洗 乾燥 噴面漆 再乾燥 * Hydro graphics is a process that transfers decorative ink graphics to a three dimensional part. These graphics are printed on a thin water-soluble film. The printed graphic film is placed on water and the film begins to soften. A chemical activator is applied to the film at the appropriate time, and this leaves the ink in an oil-like state floating on the water surface. The part is then immersed into the water. As the water wraps around the part, the water takes the graphic with it. The ink graphic adheres to the properly prepared part. The part is then removed from the water, rinsed, and a clear coat of paint is applied to achieve the desired gloss level and to protect the decorative graphic. Hydrographic 除塵 噴涂底漆或界面漆 靜電刷除塵 靜電槍除塵 噴漆線 工件 將轉印薄膜圖文層朝上平鋪于轉印水槽水面上，將活化劑均勻地噴塗在圖文表面，使圖文層活化，使圖文層油墨處於游離狀態。 將工件沿其輪廓貼近水轉印薄膜，圖文層在水壓的作用下轉移並黏附到產品表面。 轉印過程中，工件與水披覆膜的貼合速度要保持均勻，保證薄膜適當的拉伸。 將工件從水槽中取出，用清水沖洗除去表面殘留的薄膜。 將工件放在烘乾爐內烘乾， 以利於轉印油墨層的徹底乾燥，增加油墨附著牢度。 將工件表面噴塗面漆，以達到工件的外觀要求及加強對轉印圖文層的保護。 噴漆線 工件噴完面漆後放在烘乾爐內烘乾，以增加油墨附著牢度。 水轉印 Patterns *