使用CAD提高绘图效率的途径和技法(国外英文资料).doc

使用CAD提高绘图效率的途径和技法(国外英文资料) The use of CAD techniques and ways to improve the drawing efficiency Keywords: construction drawing One, follow certain principles of mapping In order to improve the drawing speed, the user should follow the following principles of mapping: 1. steps: setting the map to set up unit and precision to build several layers to set the object style to begin drawing. 2. always use 1:1 drawing ratio. In order to change the size of the construction drawings, can print print different proportion in paper space. 3., set the layer color and line width of different elements of different types of objects and primitive objects, color bylayer (BYLAYER). 4. need precise drawing, can use the grid capture function, and the grid spacing is to capture the appropriate value. 5. dont put the frame and graphics drawn on the same picture, should be in the layout (LAYOUT) in the frame according to block insertion, and then print out the map. 6. famous for objects, such as view, layer, block, line, text style, print style, named not only simple, but also to follow certain rules, in order to find and use. 7. some commonly used settings, such as layer, annotation style, text styles, etc. are arranged in a grid to capture the graphics template file (i.e., save the file as *.DWF), after the drawings, you can click the template to open it in creating new graphics wizard, and start drawing. Two, choose the appropriate command The user can control the AutoCAD, is based on a series of commands to achieve it. AutoCAD after receiving the order, will execute the command immediately and to complete the corresponding function. In the specific operation process, although there are many ways to achieve the same purpose, but if the command is properly chosen, it will significantly reduce the operating procedures, improve the efficiency of construction drawing. The following only lists several typical cases. The 1. generation line or line segment (1) in AutoCAD, LINE, XLINE, RAY, PLIN