常用器件封装(国外英文资料).docVIP

常用器件封装(国外英文资料) { Resistance AXIAL0.3 0.4 Triode TO-92A B Capacitor RAD0.1 0.2 Led DZODE0.1 Single pin SIP+ pin number Double pin DIP+ foot count Electrolytic capacitor RB.1.2....... } Resistance AXIAL Non-polar capacitor RAD Electrolytic capacitor RB- Potentiometer VR Diode DIODE Triode TO Power supply block 78 and 79 series TO126H and TO-126V The FET is the same as the triode D44 D37 D46 rectifier bridge Single row multi pin socket, CON, SIP Dual in line element DIP Crystal oscillator XTAL1 Resistors: RES1, RES2, RES3, RES4; the package attribute is axial series Non-polar capacitor: cap; the package property is RAD-0.1 to rad-0.4 Electrolytic capacitor: electroi; the package property is rb.2/.4 to rb.5/1.0 Potentiometer: Pot1, pot2; encapsulation property is VR-1 to vr-5 Diode: the package property is diode-0.4 (small power) diode-0.7 (high power) Triode: common packaging attributes for TO-18 (ordinary triode), to-22 (high-power transistor) TO-3 (high-power Darin) Catheter The power regulator blocks have 78 and 79 series; the 78 series, such as 780578127820, etc. The 79 series has 790579127920 Common encapsulation attributes are to126h and to126v Rectifier bridge: BRIDGE1, BRIDGE2: package attributes for the D series (D-44, D-37, D-46) Resistance: AXIAL0.3-AXIAL0.7, where 0.4-0.7 refers to the length of resistance, usually AXIAL0.4 Ceramic capacitors: RAD0.1-RAD0.3. Where 0.1-0.3 refers to the size of the capacitor, usually RAD0.1 Electrolytic capacitor: RB.1/.2-RB.4/.8, where.1/.2-.4/.8 refers to the size of capacitors. General 100uF use RB.1/.2100uF-470uF uses RB.2/.4, 470uF uses RB.3/.6 Diode: DIODE0.4-DIODE0.7, in which 0.4-0.7 refers to diode length, generally used DIODE0.4 Light emitting diode: RB.1/.2 Integrated block: DIP8-DIP40, where 8-40 fingers have many feet, and 8 feet is DIP8 chip resistor 0603 indicates that the package size has nothing to do with the specific resistance But the package size is related to power, usually 0201 1/20W 0402 1/16W 0603 1