房屋建筑学基础的类型(国外英文资料).docVIP

房屋建筑学基础的类型(国外英文资料) The third section based type in according to the materials used and the characteristics can be divided into in the rigid foundation stress: in the flexible foundation. In the foundation according to the structure form is divided into in the independent foundation in the foundation in the raft foundation in the box foundation in pile foundation. In a non reinforced foundation in exergy exergy exergy in the rigid foundation in also called 1 in the rigid foundation in refers to the strip foundation made of rigid material to the wall or the single foundation under column. In the 2 in rigid materials in exergy: generally refers to high compressive strength and the tensile strength and shear strength of low material. He used a brick, lime, concrete, concrete, stone etc.. In the 3 application in the exergy in multi-storey buildings or light plant. In the base area of the substrate to increase the width of B is generally greater than the upper wall width to meet the needs of the requirements of the allowable bearing capacity of foundation. In the 4 in exergy rigid angle according to the superstructure test shows that the stress transfer in the foundation along The angle distribution of the transmission angle is called pressure distribution angle or rigid angle. When the rigid foundation bottom width exceeds the control range of rigid angle when exergy base will produce tensile stress. Bad. So when the expansion of exergy exergy basis in order to ensure the foundation bottom surface tension based amplification part must ensure that the exergy In the rigid angle range. In order to facilitate the construction of the design will be converted into a rigid angle tangent of exergy value b/h with exergy aspect ratio of said rigid angle. Stress and transmission characteristics of rigid foundation; basic material quality requirements Range width ratio PK = 100 100 PK = 200200, PK = 300 The concrete foundation of C15 concrete 1 from 1.001 from 1.001 from 1.25 C15 co