汕头市中考满分作文-无题(国外英文资料).doc

汕头市中考满分作文-无题(国外英文资料) The template construction, the workers should first be familiar with the drawings, and the beam plate according to the drawings, review content change up. The post pouring belt and the construction joint shall be carried out according to the standard. After the combination of the die, the number shall be piled up and the formwork shall be laid by numbering. The basic construction process of the project is as follows: the base plate, the foundation, the back beam, the underground, the two layer wall column, the ground layer, the beam slab, the ground wall, the column and the roof of the basement. (1) the basic principles of template design; Ensure the smoothness and rigidity of the formwork to ensure the whole effect after the concrete is released. Adopting standardized, integrated and tool oriented templates to improve work efficiency and shorten construction period. (two) supply and deployment of formwork material; The carpenter turn like staff turnover, and submit the completed template layout template (steel pipe, wood material list Zhou Fang), Zhou material list after the project material supply department responsible for the audit. By the project department according to the progress of each unit, batch entry, unified deployment. Set up strict material management system, and make saving measures to reduce material loss. The basement of this project is partly made of civil air defence basement, and some of the indoor shear walls are explosion proof walls, all of which have air tightness requirements and civil air defense requirements. On the external shear wall and column wall reinforcement 12 civil air defense pull screw should be waterproof treatment for indoor wall column, phi, pull screw only limit plate, can seal plate do not need to pull screw. To pull the screw set reinforcement shear wall template basement, according to the construction of the concrete lateral pressure calculation, pull screw should be set up according to the secret M