胶印油墨家族：UV油墨(国外英文资料).docVIP

胶印油墨家族：UV油墨(国外英文资料) Offset printing ink family: UV ink In offset printing, the use of UV ink for printing, often referred to as UV offset printing. UV offset printing ink is the use of ultraviolet (UV) radiation energy, so that the liquid chemicals through rapid cross-linking, curing into an ink film of a kind of ink. It is one of the energy curable inks. UV offset printing ink as a kind of offset printing ink, it should first be offset printing, so UV offset printing ink should also have ordinary offset ink has some characteristics to meet the requirements of printability. These performance requirements including the fluidity, dispersion, emulsification, anti metastatic, low viscosity, good ink and drying and finishing etc.. Characteristics of 1 and UV UV curable inks Ultraviolet light is a kind of electromagnetic wave whose wavelength is shorter than visible light, and different wavelengths have different energy. In general, the UV light wavelength used for UV curable ink curing is 250 to 400nm. The ultraviolet light source used in industry is high pressure mercury lamp and metal halogen lamp, and the efficiency is the highest between 200 ~ 300nm and 300 ~ 400nm respectively. Therefore, colorless UV curable inks are commonly used in high-pressure mercury lamps, while colored UV curable inks are commonly used in metal halogen lamps. UV curing ink is the fundamental characteristics different from other types of ink: ink layer curing film is the result of the strong ultraviolet light irradiation, the membrane material by light initiator and rapid polymerization, completed in a few seconds to tens of seconds. If you do not contact strong ultraviolet light, even if heated, the ink will also be in a viscous state for a long time, and can not be cured. The main advantage of UV curable inks is that they are: (1) the ink layer with a thicker printing can be cured at one time, with a maximum thickness of 100~150 mu m. (2) the curing time is short, the energy consumption is