走近专业无线话筒(国外英文资料).docVIP

走近专业无线话筒(国外英文资料) Close to professional wireless microphones - Sennheiser, Shure, iron triangle, MIC, AKG Publisher: admin hits: 574 entry time: 2009-3-15 Here I will be divided into three parts, the wireless microphone principle, the use of methods for analysis and discussion. The first part mainly analyzes the audio head and the transmission touch group. The second part illustrates the problems and the matters needing attention in the use of wireless microphones through some cases. The third part discusses the microphone technical indicators and the work level of the mixer, and finally lists the most advanced and popular wireless microphone. One tone head and wireless transmission touch group The sound head is the microphone, and it is the most important part of the microphone. There are two main types of sound heads: moving coil and capacitor. The conversion of moving coil principle is: in the voice coil and diaphragm magnetic gap connected together, when sound waves acting on the diaphragm, the diaphragm driven by voice coil for magnetic line cutting motion, electromotive force and acoustic wave with regularity in the voice coil ends, so as to realize the conversion between energy and electricity. The main components of the moving coil microphone with magnetic steel, damping material, membrane and electrode etc.. These are to determine the microphone sensitivity, frequency response, directivity, signal to noise ratio, harmonic distortion, the maximum sound pressure level, etc.. The condenser microphone is now widely used. The principle is to evaporate a thin layer of metal on a special organic film as an electrode, that is, (Zhen Mo), and a rear plate to form a flat capacitor. When the diaphragm vibrates under the action of the sound wave, the gap between the diodes is changed, and the capacitance changes. When a constant DC voltage between the two electrodes of the capacitor, the capacitance of the vibration diaphragm plate capacitor changes, the quantity of ele