锅炉膜式管屏制造技术条件(国外英文资料).docVIP

锅炉膜式管屏制造技术条件(国外英文资料) Edition： A SC/ASME10002-2010 boiler membrane tube screen manufacturing technology specifications 2 pages altogether Page 15 Page number whole Edition A Change date change No. Edition： A SC/ASME10002-2010 boiler membrane tube screen manufacturing technology specifications 3 pages altogether Page 15 1, the subject content and scope of application This standard specifies the technical requirements for the manufacture and acceptance of membrane type tube screens for boilers. This standard applies to press ASME standard design and manufacture of boiler membrane tube screens. 2 citation criteria The terms in the following documents are referenced by this standard and become the provisions of this standard. Any dated reference document, All subsequent amendments (excluding the content of corrections) or revisions are not applicable to this standard, however, the root is encouraged The parties to this Agreement have studied whether the latest versions of these documents can be used. Any undated Yin Yongwen The latest version is applicable to this standard. ASME Sec. I construction rules for power boilers ASME Sec. V nondestructive testing ASME Sec. IX welding and brazing qualification Technical specification for pipe manufacture of SC/ASME10006-2010 boiler Acceptance rules for raw materials of SC15001-2010 boilers Technical conditions of hydraulic pressure test for SC10016-2010 boiler SC07001-2009 boiler seal products and traceability Technical specification for painting and packaging of JB/T 1615-1991 boiler 3 technical requirements 3.1 materials The selection of steel pipe and flat steel used for 3.1.1 tube screen shall conform to the design drawings and technical documentation requirements. material Material substitution must be carried out in accordance with the relevant provisions of substitution procedures. 3.1.2 pipes, flat steel and welding materials for tube screens must be made in accordance with SC15001 standards for factory inspection, Mater