隧道施工方案(国外英文资料).docVIP

隧道施工方案(国外英文资料) Two, construction plan Type II surrounding rock Rock by bench method, the construction sequence for excavation of upper half of the arc heading to the initial section supporting and excavation of core soil, excavation section, section of initial support. The upper part of the arc heading excavation section size is 2.0m, in order to facilitate the initial support of the operation, at the same time to face rock steady, annular footage of not more than 1 meters, using a hand-held air gun drilling and excavation, the wet shotcrete, the construction boom spraying machine, self unloading truck platform supporting construction, the upper half section the construction steps: The hand-held pneumatic drill drill. The upper arc part hole, drilling depth of 1.7m, the excavation footage is about 1.5m. Construction sequence of semi excavation of type II surrounding rock (hint) 2. Blasting explosives: select RJ series of emulsion explosives with 35mm diameter, drug driving eye rolls, light eyes with 25mm diameter cartridage burst, tophole used car platform charge. The explosive eye is made of interval charge, and the plastic nonel tube and non electric detonation system are used in the detonation. We are looking for top exhaust. Manual cleaning hole slag, sorting out the initial support of working face. The first injection of sprayed concrete. The unloading loader. With large tonnage dump truck mucking with side dress. 6. The installation of steel arch, a steel frame should be as close as possible to the face with steel, each internode connected by bolts, between two rows of steel frame with longitudinal reinforcement connection steel frame is erected by the car platform with electric hoists. The steel frame at the bottom of the cross section is made of 2 22mm lock bolts, and the length is 3.5m. 7. Drilling charge excavation section of core soil. 8. Unloading loader with large tonnage dump truck mucking with side dress. Only 3-4 cycles for lag. Second times will be