音响选购(国外英文资料).docVIP

音响选购(国外英文资料) Main technical indicators of VOD stereo 2009-06-19 17:51:55 source: Author: [small] browse: 9641 comments: 0 speakers choose equipment we should pay attention to the first several technical indexes of speakers, power, frequency range, sound technology, distortion, sensitivity, impedance, snr! So what are the implications of these indicators?! 1. power Simply speaking, the sound that sounds on the audio system can feel. According to international standards, there are two kinds of power marking methods: rated power and maximum endurance power. Rated power is rated in the frequency range of loudspeaker to a specified continuous analog signal waveform, the speaker can be issued by the maximum undistorted power, and maximum power is the maximum power of the speaker without any damage. Usually, in order to cater to consumer psychology, businesses usually have a lot of musical power, so when buying multimedia speakers, they should be rated power. The maximum withstand power of the speaker equipment is mainly determined by the power of the power amplifier chip, and in addition, it has a lot to do with the power transformer. A weigh principal deputy speaker of the difference in weight can roughly know the weight of the transformer, the greater the power is usually more severe. But the power is not sound better, suitable is the best, for ordinary home users of twenty square meters room, the true meaning of my fifty W power is enough, no need to pursue high power. 2. range of frequency response The full range of frequency response is called frequency range and frequency response. The former refers to the range between the lowest effective playback frequency speaker equipment system and the highest effective playback frequency; the latter refers to a constant voltage output is connected to the audio signal and system, the sound pressure produced by the speaker equipment with frequency change increased or attenuation and phase with frequency change phenomenon. The