音箱烧坏的原因(国外英文资料).docVIP

音箱烧坏的原因(国外英文资料) Speakers burned out reasons, [AD: professional website navigation: ] [AD: professional second-hand stores: ] 1, speakers and power amplifier configuration is not reasonable, inexperienced tuner will think, power amplifier output power is too large, causing damage to the unit, but otherwise. In a professional situation, speakers can generally withstand 3 times the rated power of the large signal impact, instantaneous withstand 5 times the peak impact of the rated power, and no problem. As a result, the power of the power amplifier is not large due to unexpected strong impact or long time whistle of the microphone, but the firing unit is rare. As we all know, there are a number of speakers in the loudspeaker box, the power that the speaker receives is different according to the frequency division points. Speaker rated power, the general professional speakers indicate the maximum pink noise power, that is, the speaker rated power refers to pink noise or broadband can withstand analog signal power. A frequency division of 1.6kHz, rated power of 100W two frequency speakers, at rated power, the bass unit can be assigned to the output power of 78W, while the tweeter is only assigned to 22W. Thus, the 100W power of the pink noise or the ordinary program signal power is applied to the speaker, and it can withstand; while testing with a single frequency signal of the 100W, both the tweeter and the bass unit may be damaged. If a three - frequency loudspeaker with a medium and high frequency divider at 4kHz, then the power of the tweeter is only 5% of the nominal power. If the power is not allocated properly, it will easily cause damage to the treble unit. Under normal circumstances, if the input signal to the speaker of the 1 times increase in power, tweeter only increased 5W; but if the power of the power amplifier, the signal clipping overload occurs, the harmonic component will increase. Originally 1kHz sinusoidal signal, square wave clipping close in overl