高级汽车修理工试卷5(国外英文资料).docVIP

高级汽车修理工试卷5(国外英文资料) 1, select the correct answer. Choose the correct answer, and fill in the corresponding letter in the brackets. In the actual cycle, it is () that the ideal cycle is replaced by the ideal cycle. (A) the gas process (B) gas process (C) exhaust process (D) compression process It is reasonable to determine the purpose of the gas phase in order to (). (A) increase the volume of air intake (B) (C) A and B (D) improve the economy of the engine 3. In order to improve the filling coefficient, should reduce the resistance of the air intake system, in the air intake system, () through the cross section of the youngest, and changing the flow resistance should first consider the biggest. (A) air inlet (B) carburetor (C) air filter The best ignition Angle increases with the speed of rotation (). (A) increases (B) invariant (C) decreases (D) decreases first When the engine is working, the engine can still catch fire when the ignition switch is cut off, which may be caused by (). (A) the surface ignition (B) explosion (C) high piezoelectric high (D) mixture is too strong In the combustion process, the highest temperature formation is in (). (A) ignition period (B) period (C) period (C) One of the main reasons for diesel exhaust black smoke is (). (A) the injection time is too early (B) (C) the fuel injection is too small (D) to burn too short The effective indicator of engine economy is the effective fuel consumption rate and (). Efficient power (B) effective thermal efficiency (C) effective torque (D) effective pressure The car engine should be kept under (), the torque, the power is larger, the oil consumption is low. (A) high speed (B) medium speed (C) low speed (D) Which of the following statements is correct according to the preangle adjustment characteristics of the ignition? (A) the optimum ignition timing Angle increases with the speed of rotation (B) the optimum ignition timing Angle decreases with the increase of the rotational speed (C) the optimum ign