加气砖质量标准(国外英语资料).docVIP

加气砖质量标准(国外英文资料) Gas concrete block The reinforced concrete blocks are composed of cement, slag, sand, lime, etc., which are the main raw materials, which are formed by stirring and steaming. The dimensions of the gas concrete block are 13 to 46. The dimensions of the gas concrete block are 13-46 Masonry is the size of the dimension block Length L width B height H L1 width B1 height H1 600, 100, 125 150 200 250 300, 200, 250 300 L - 10 B H - 10 120 180 240 The reinforced concrete blocks are divided into: A1, A2, A2.5, A5, A5, a7, and A10. The added gas concrete blocks are divided into: B03, B04, B05, B06, B07, B08, and B08. The gas concrete block is divided into the best grade, one grade and the quality of the quality, the density and the compressive strength. The dimensions of the added gas concrete blocks shall allow the deviation and appearance quality to be in accordance with the provisions of table 13-47. The gas concrete block dimensions allow the deviation and appearance quality table 13-47 Project indicators Grade a, grade one, grade one (1) size allows deviation (mm) length L1 plus or minus 3 plus or minus 4 plus or minus 5 B1 plus or minus 2 plus or minus 3 plus 3, minus 4 Height H1 plus or minus 2 plus or minus 3 plus 3, minus 4 (2) the number of missing edges is no more than 0, 1, 2 The maximum size should not be greater than (mm) 0 70 70 The minimum size should not be greater than 0, 30, 30 (3) the plane bending must not be greater than (mm) 0, 3, 5 (4) the number of cracks is not more than 0, 1, 2 The length of the crack in any surface should not be greater than 0, 1/3, 1/2 The length of the crack that runs through a second is not greater than that of the crack in the surface of the crack (5) it shall not be greater than (mm) 10, 20, 30 (6) the surface is porous, and the layer is not allowed to be allowed (7) surface oil is not allowed to be allowed The compressive strength of the reinforced concrete blocks shall be in accordance with the provisions of