甲 醇 洗 操 作 问 答(国外英语资料).docVIP

甲 醇 洗 操 作 问 答(国外英文资料) Methanol washing operation Q A 1. what is the degree of fusion? Answer: fusion degree means the amount of solute dissolved in a solution of 100 grams of solvent at a given temperature. What are the advantages of the 2. valve tower? A: the air flow from the periphery of the float valve is blown into the liquid layer, the gas-liquid contact time is increased, and the entrainment of mist is reduced, and the efficiency of the tray is higher The utility model has the advantages of large force and large operation elasticity, and the structure is simpler than the bubble tower, and the pressure drop is smaller. 3. what are the factors that affect absorption? Answer: A, air speed. B and spraying density. C and temperature. D, pressure. E, the purity of absorbent. 4. try to explain the function of bearing lubricant Answer: A, reduce wear and tear in order to improve the efficiency and life of equipment. B, cooling and lubricating parts. C, rinse away the powder from the lubrication area. D damping buffer. E, anti rust, anti-corrosion and dustproof. 5. when the centrifugal pump is driving, why is the outlet valve closed and the shutdown time can not be too long? Answer: to temporarily close the outlet valve, outlet flow is zero, then the pump power required minimum, such that the motor load limit at the lowest level, in order to prevent the motor for starting current is too large to burn out, when the normal operation of the motor, should gradually open the outlet valve, otherwise it will cause the pump shell temperature rise and damaged parts. 6. what are the characteristics of low temperature methanol washing? Answer: A, low temperature methanol washing variable ventilation, can simultaneously remove impurities in gases, such as CO2, H2S, COS, HCN and gas may exist in hydrocarbons, tar, and simultaneous removal of water, gas drying, methanol solution regeneration and low energy consumption, only by reducing the pressure of flash can be most of the gas