印刷参数和片基处理对银色线路质量影响的评价.pdfVIP

中国印刷与包装研究 第2期（第1卷） 论文摘译 63 试结果证明，计算误差非常小，神经网络能够完全 ②引入一个动量项；③优化网络的方法：测定网络 满足印刷质量检测和诊断的要求，经过训练可以投 结构的理论方法（VC纬数规则）和通过训练测定网 入使用。 络结构的方法。 BP算法的主要局限性在于存在暂时性、由激活 实验证明：基于图像处理和BP神经网络的烟包印 函数的饱和行为（saturation behaviour）和训练 刷质量检测系统检测速度快，检测精度高，系统的分 算法收敛速度慢引起的局部最小值。本系统采用如 类准确率高达87%。该系统完全能够满足烟包的印刷 下方法改善收敛速度，优化神经网络结构。①选择 质量检测要求，应用于实际生产中。 一个双曲正切函数（或逻辑函数）作为传递函数； （汪珊珊 编译） Evaluation of Printing Parameters and Substrate Treatmet Over the Quality of Printed Silver Traces Author Bonadiman Renato, Marques Marco, Freitas Germano, Reinikainen Tommi Instituto Nokia de Tecnologia: Rod. Torquato Tapaj6s, 7200, Manaus/AM/Brazil renato Abstract Printed electronics provide a promising potential pathway towards the design of low cost products. Manufacturing electronic devices by printing techniques using nano-size material particles at low temperatures can revolutionize the electronics industry in coming years. Products based on printable electronics might include ultra cheap radio-frequency identification(RFID) tags, inexpensive and disposable displays/electronic paper, interior connections, parts of electronic assemblies (e.g. PWB and phone chassis), sensors, memories, and wearable user interfaces. Moreover, PWBs could be replaced by an inkjet printed substrate. Direct printing of nanoparticle inks could also be used for the electrical interconnection of components (traces). Considering this scenario, the challenge is to provide sufficient quality of interconnecting traces considering the selection of appropriate m