手持电动工具全教育PPT.pptVIP

Hand and Power Tool Safety手持及电动工具安全;General Safety Precautions一般安全防范措施;Appropriate personal protective equipment should be worn due to hazards that may be encountered while using portable power tools and hand tools. 在使用手持和电动工具时，必须针对可能会遇到的危害，使用适当的劳动防护用品。 Floors should be kept as clean and dry as possible to prevent accidental slips with or around dangerous hand tools. 地面应尽可能保持清洁、干燥，以避免在危险的手持工具附近意外摔倒造成伤害。 ;Hand Tools手持工具;Hand Tool Misuse误用手持工具;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Basic Hand Tool Safety Practices基本手持工具安全工作方法;Some Non-Sparking Tools;Hazards of Power Tools手持动力工具的危害;General Safety Guidelines for Power Tools手持动力工具一般安全导则;Be aware of all power lines and electrical circuits, water pipes, and other mechanical hazards in your work area, particularly those below the work surface, hidden from the operator‘s view, that may be contacted.注意工作场所附近可能会接触到的电线、水管及其它机械危害，特别是在工作平面以下，操作工视线以外的部分。;Never carry a tool by the cord or hose. 不要提着工具的电线或软管。 Never yank the cord or the hose to disconnect it from the receptacle. 不要猛拉工具的电线或软管来使其脱离能源。 Keep cords and hoses away from heat, oil, and sharp edges. 保持电线或软管远离热源、油污及锋利边缘。 Disconnect tools when not in use, before servicing, and when changing accessories such as blades, bits and cutters. 在不使用时，使用之前以及更换附件时，必须脱离能源。;All observers should be kept at a safe distance away from the work area. 所有的监护者应与工作区域保持一定的安全距离。 Secure work with clamps or a vise, freeing both hands to operate the tool. 用夹具将工件固定住，用双手来操作工具。 Avoid accidental starting. Workers should not hold a finger on the switch button while carrying a plugged-in tool. 避免意外启动。在搬运时，不要将手指放在开关按钮处。;Tools should be maintained with care. They should be kept sharp and clean for the best performance. Follow in