松套层绞式单细圆钢丝铠装光缆（GYTA53+33）-长飞光纤光缆(上海.docVIP

松套层绞式单细圆钢丝铠装光缆（GY）Stranded Loose Tube Single-steel-wire Armored Cable 产品描述 Description GYTA53+33光缆的结构是将250μm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根金属加强芯，松套管（和填充绳）围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带（APL）纵包后挤一层聚乙烯内护套，双面涂塑钢带（PSP）纵包后挤制聚乙烯外护套。再经单细圆钢丝铠装后，最终挤制聚乙烯外护层成缆。 The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. And a PSP is longitudinally applied over the inner sheath, the cable is covered with a PE outer sheath. After the single-steel armored, the cable is finally completed with an outer sheath. 产品特点Characteristics 具有很好的机械性能和温度特性 Good mechanical and temperature performance 单细圆钢丝铠装使光缆具有更强的抗拉性能 Single-steel ensures good performance of tensile strength 松套管材料本身具有良好的耐水解性能和较高的强度 High strength loose tube that is hydrolysis resistant 管内充以特种油膏，对光纤进行了关键性保护 Special tube filling compound ensure a critical protection of fiber 良好的抗压性和柔软性 Crush resistance and flexibility 采用下列措施来确保光缆的防水性能： The following measures are taken to ensure the cable watertight: 单根钢丝中心加强芯Steel wire used as the central strength member 松套管内填充特种防水化合物Loose tube filling compound 完全缆芯填充100% cable core filling 涂塑铝带（APL）防潮层 APL moisture barrier 双面涂塑钢带（PSP）提高光缆的抗透潮能力 PSP enhancing moisture-proof 良好的阻水材料防止光缆纵向渗水 Water-blocking material 光缆结构图 Cable Structure 产品标准Standards 长飞上海公司GYTA53-33光缆符合YD/T 901-2001和IEC 60794-1标准 YOFC(SH) GYTA53-33 cable complies with Standard YD/T 901-2001 as well as IEC 60794-1.  （GYT33） 适用： Application: Direct buried/Climb/Underwater 发布日期 Issue Date：200.01 光学特性Optical CharacteristicsG.652 G.655 50/125 μm 62.5/125 μm