封闭模铸沿空留巷隔离墙的材料优化设计及性能研究.pdfVIP

Subject ：Research on the Material Performance Used in Silled Wall by Gob-Side Entry Retaining Specialty ：Structure Engineering Name ：Zhang Lina （Signature） Instructor ：Hui Xingtian （Signature ） ABSTRACT Early support, early strength, stiffness, tight sealing roadside packing material is the key to the success of gob-side entry retaining, and the roadside packing materials are able to achieve high strength and tight sealing requirements, common defect is unable to realize the timeliness, can not meet the need of efficient mine production. To solve these problems, This paper presents a new type of closed template die cast masonry of gob-side entry retaining wall technology, because the use of precast concrete masonry as high strength core wall, this technology has higher early strength, with grouting technology can ensure the wall are tightly sealed and can timely top bracing. In this paper, through the oretical analysis, laboratory experiments and numerical simulation method to study the material performance of the new gob-side entry retaining wall. Through the theoretical analysis to determine the performance of the roadside packing material requirements. first of all on the gob-side entry retaining surrounding edge motion are analyzed, through the superimposed plates principle of roadside support resistance calculation, to determine the packing body has higher early strength requirements;in order to achieve the above requirements, and in combination with the closed template die casting wall construction technology, developed a two-component grouting material, It consists of A, B two kinds of material releases water