Tech147Dr.SamuelC.Obi分析.docVIP

Tech 147 Dr. Samuel C. Obi Team Project (60 Points) Manufacturing Project Management: Green Manufacturing Systems Design and Analysis In this project, different green manufacturing systems will be planned and designed to include the following key tasks: Project planning Product forecasting Production scheduling Product design Facility design Facility layout Systems analysis Process planning Production costing Model fabrication  To this end, the class will be divided into groups of equal (3) number of students. Each group or team will design a different green manufacturing system. The product in each system may consist of as many parts as the group desires, but at least three of these parts must be produced with the manufacturing systems generated by the team. The project incorporates planning, analysis, design, and management of green manufacturing systems. Assignments Each team will divide the tasks required to plan and design a system for producing their product into the areas described below. Each team will produce one model of their selected product. The model should look as much as the product as possible. Any manufacturing system may be used to make the model. A. Design Analyst/Manager (15 Points) Designs and analyzes product and facilities for DFM, DFA, specifications, form, materials, and tooling. This person also produces all the drawings that support the assembled product, parts, tooling, and facilities with all the details showing the flow paths. This person also provides all related green analysis of the design area. This person will confer with, and collect needed key information from, Production Analyst/Manager and Sales Analyst/Manager to generate the following: Product Design: A product approved by the instructor must be designed by this person. The team members must agree on this product before they bring the idea and sketches to the instructor for approval. Each part or piece of the product must undergo at least five different processes