RTCwithbatteryback-upswitchand详解.PDFVIP

NXP RTC PCF85263 RTC with battery back-up switch and time stamp Energy-efficient, autonomous timing circuit featuring time stamp, battery back-up, two alarms, and resolution up to 1/100 s. KEY FEATURES ` Multiple operating modes The NXP PCF85263 is a CMOS real-time clock (RTC) and - Clock (seconds to 99 years) calendar, optimized for low power consumption, that switches - Stopwatch or elapsed-time counter (1/100 s to 999 999 h) automatically to battery power when main power is lost. - WatchDog in parallel ` Battery input voltage can be lower or higher than VDD The PCF85263 can be configured as a stopwatch (or elapsed- ` Meets UL requirements time counter) with a resolution of up to 1/100 s. Three time ` Time-stamp input, three time-stamp registers stamps make it easy to register special events, and the ` Two independent alarms device can also register tamper detection or time of battery ` Electronic frequency tuning via command switchover. ` Large clock operating voltage range (0.9 to 5.5 V) ` Ideal for battery-backed operation (IDD= ~0.27 µA) A sophisticated battery backup circuit improves power 2 ` 400 kHz two-line I C-bus interface (at VDD = 1.8 to 5.5 V) efficiency. The circuit makes it possible to use a battery with a ` SO8, TSSOP8, TSSOP10, and tiny DFN2626 package nominal voltage that is higher or lower than the regular supply voltage. For example, in a system that uses a VDD of 2.5