InstructionsforDoingaPrintrunof70-merOligosin3XSSC分析.docVIP

Instructions for Doing a Printrun of 70-mer Oligos in 3X SSC on our Genetix QArray2 Arrayer Quick checklist for starting a run: ( fill and start external humidifier ( turn big red power knob on right side of machine ( press the red reset button on the front ( turn on the computer ( start the software ( check the water level in the nebulizer (see below), and turn on ( wipe down inside with 70% EtOH, and spray with airgun ( fill the water and ethanol bottles, and pull them forwards against the front bar ( you MAY need to refill these during the run, check every few hours! ( make sure th