CATIA_多轴加工A.ppt

Copyright DASSAULT SYSTEMES 2002 Multi-AxisSurface Machining Table of Contents (1/2) Wing p.4 Design Process p.5 Create a new Part Operation p.6 Create a Multi-Axis Sweeping Operation p.8 Create a Multi-Axis Contour Driven Operation p.16 Create a Multi-Axis Curve Machining Operation p.20 Hood p.24 Design Process p.25 Perform a Sweep Roughing in 3-Axis p.26 Perform a Multi-Axis Sweeping Operation p.27 Perform a Multi-Axis Contour Driven Operation p.28 Perform a Multi-Axis Curve Machining Operation p.29 Pocket p.30 Design process p.31 Tangent Axis with Infinite Fa