细粒难选锐钛矿化学提纯试验研究.pdfVIP

第 卷第 期 35 2 Vol.35 No.2 非金属矿 2012 年3月  Non-Metallic Mines March, 2012 细粒难选锐钛矿化学提纯试验研究 1,2 1,2 1,2 高利坤   戴惠新   陈禄政 （1 昆明理工大学 国土资源工程学院，云南 昆明 650093 ；2 西部特色矿产资源高效利用教育部工程中心，云南 昆明 650093） 摘  要 TiO2 品位为10.97% 的某锐钛矿，经浮选获得品位为30.91% 的粗精矿，对该浮选粗精矿进行“加碱焙烧- 盐酸中和”的化学选矿试 验研究。研究表明，氢氧化钠用量300 kg/t ，焙烧温度500 ℃，焙烧时间40 min ，盐酸用量15 kg/t ，中和时间10 min ，对TiO2 品位为30.91% 的粗精矿， 化学选矿可以将TiO2 品位提高到67.63%，回收率为87.03%。采用浮选- 化学选矿工艺能有效实现细粒难选锐钛矿的选矿，为该类矿物的开发应 用提供了一种新途径。 关键词 锐钛矿 焙烧 中和 化学选矿 TD962.7 A 1000-8098(2012)02-0028-03 中图分类号： 文献标识码： 文章编号： Experimental Research on One Fine Particle and Refractory Anatase Ores by Chemical Purification Gao Likun1,2 Dai Huixin1,2 Chen Luzheng1,2 (1 Faculty of Land Resource Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093; 2 Education Ministry Engineering Research Center of Characteristics of Western Mineral Resources, Kunming, Yunnan 650093) Abstract A roughing concentrate with grade of 30.91% and recovery of 80.32% was obtained by flotation. The chemical mineral processing of “alkalify roasting and hydrochloric acid neutralization” was carried for the roughing concentrate. It was shown that the consumption of sodium hydroxide was 300 kg/t, the roasting temperature was 500 ℃, the roasting time was 40min, the consumption of hydrochloric acid was 15 kg/t, the neutralization time was 10min. The roughing concentrate with grade of 30.91% increased to 67.63% and the recovery was 87.03%. It provided a way for the processing