风力发点机齿轮箱结构.pptVIP

GB100-001-PPT template presentation Vestas Wind Systems A/S GB903-003-V90-WTG installation 齿 轮 箱 齿轮箱 不同类型的齿轮 行星齿轮理论 星齿轮理论, V90行 3 MW 平行齿轮理论 平行齿轮理论 平行齿轮 平行齿轮 - 轴承 齿轮箱 – V80 油 泵 滤 芯 离线过滤 温度测量 油加热器 - V80 油位指示 - V80 齿轮箱悬架– V80 齿轮油更换 齿轮油样 打开齿轮箱 打开齿轮箱 检查方法 损伤样例 完好的齿轮 微点凹陷 磨 损 压力印记 轴承损伤 轴承损伤 对齿轮损伤照相的操作方法 主轴连接 - V80 and V82 收 缩 盘 V80 收缩盘 – V80 安 全 2. 1. 由于震动形成的损伤 由于震动形成的损伤 由于泄漏的电流造成的损伤 腐蚀 V80 1,8/2,0 MW V82 1,65MW 空心轴. 低压螺母. 低压室. 低压通道. 高压通道. 外部环. 内部环. 主轴. Purpose: Explain the good pratice of taking pictures of gear damage Notes: *Focus the picture on the main problem. *Take close up pictures, but maintain the minimum focusing distance. *Make the dimensions visible by photographing a finger, pen or tape ruler together with the object. *Take several pictures. *Change angle, where appropriate with and without flash. Purpose: Explain the purpose of schrink disc Notes: The main shaft is inserted in the hollow low-speed shaft on the gearbox. A shrink disc is mounted on the outside of the hollow shaft, to secure the main shaft in the hollow shaft. The bolts on the shrink disc are tightened to secure the main shaft in the hollow gearbox shaft. See doc. 961205 Dismounting / mounting of shrink disc V66-V80 Purpose: Explain the shrink disc Notes: Two different types are used in Vestas. Hydraulic and mechanical types Purpose: Explain the animation Notes: Purpose: Explain about safety when working with the main gear Notes: Working with oil Avoid inhalation of mist and vapour. Protective clothing must be impervious to oil. Avoid prolonged or frequent skin contact. Do not wear contaminated clothing. Avoid eye contact. Use eye protection Practice good personal hygiene Be aware of the rotation danger of the gear. 齿 轮 箱 大唐风机培训 简介 目的 理解轴承原理 理解维斯塔斯齿轮箱设计 理解如何检查齿轮箱 V80 1.8/2.0 MW V82 1.65 MW V90 3.0 MW 圆柱齿轮 内啮合齿轮 斜齿轮 行星齿轮 蜗杆齿轮 锥齿轮 Sun pinion High speed Low speed Medio speed 2. 中间级 1. 高速级 3. 恒星齿 1. 2. 3. 1. 中间级齿轮 2. 低速级齿轮 1. 2. 圆柱滚动轴承 球形滚动轴承 V80 离线滤芯 6