uCOS平台下的LwIP移植非常详细.doc

1 下载LwIP................................................................................................................................................................. 2 2 个......................................................................................................................................... 2 3 把LwIP加入工程..................................................................................................................................................... 2 4 编写统拟层关码............................................................................................................................. 3 4.1 统拟层说――中文翻译 ................................................................................................. 3 4.2 编写统拟层................................................................................................................................. 6 4.2.1 备――建立文件、定义数类 ......................................................................... 6 4.2.2 信号数............................................................................................................................. 8 4.2.3 邮数............................................................................................................................... 13 4.2.4 实现sys_thread_new()数 ....................................................................................................... 20 4.2.5 实现sys_arch_timeouts()数 ................................................................................................. 22 4.2.6 实现临护数....................................................................................................................... 25 4.2.7 扫――结统拟层编写 ....................................................................................... 26 5 LwIP――初始设络驱动................................................................................................................... 28 5.1 备――建立LwIP入口函数 ................................................................................................... 28