4T65E主动变速器各档位的准确应用(国外英文资料).docVIP

4T65E自动变速器各档位的正确使用(国外英文资料) The 4T65E automatic transmission gear is used correctly The correct use of the buick automatic transmission in Shanghai The buick sedan made by Shanghai general motors is equipped with a 4T65E hydraulic transformer automatic gearbox, with a transversal front drive structure. The 4T65E automatic gearbox in Shanghai is divided into P, R, N, D, 3, 2 and 1. The following are the functions and considerations of each of the stops in the order of the logo of the automatic gearbox. P (ParKing) for use. On the traffic sign P is the meaning of parking, automatic transmission gears P, is also used by parking, it is the use of machinery to lock the output rotating part of the car, make the car cant move, but did not cut off power engine and transmission between the separation. So when the car needs to stay in a fixed position on a long time, or in the dock before leaving the vehicle drivers should be shut down and good braking and push the shifter lever to P position. When the car is stopped or completely stopped, push the variable handle to the P stop, and the engine will still be able to operate. When the car is on the road, it must not be put in P. It is important to note that the vehicle must be stopped completely when can use P block, otherwise automatic transmission mechanical parts to produce click clicking voice, at the same time damage related parts. Additionally, automatic-shift cars device neutral start switch, make the car can only be P or N to start the engine, in order to avoid false start on other gears that car suddenly flee before, but when we start the engine, the best put the shifter lever in the position of the P, in order to safety. If the car is parked and the engine is running, such as a cold air, should the pole be placed in the P position or in the D position? In this case, absolutely can not be put in the position of the D, because when use D to block, will do with the feet step on the brake pedal for a long time, a bit not