FFC简介(国外英文资料).docVIP

FFC简介(国外英文资料) Normally it is 0.12 mm, and the thickness of the line can be adjusted according to actual demand. This is determined by the material used in the FFC, FFC row line is composed of two layers of insulation film, middle pressure flat copper conductors, so the thickness of the ribbon cable IT = + + conductor thickness of film thickness on the thickness of the film, the film thickness of the commonly used are: 0.043 mm, 0.060 mm and 0.100 mm, commonly used conductor thickness are: 0.035 mm, 0.05 mm and 0.10 mm, etc.; For example, the common thickness of 0.12 mm is as follows: 0.043 (superglue) + 0.043 (down) + 0.035 (conductor thickness) = 0.121 mm. If you need more detailed performance parameters, you can contact FFC specialist manufacturer, youtong technology (fengshun) co., LTD. Damage to metal head, to what extent? 1. If the gilding layer of the knowledge surface is lost, it can be scraped with a knife. 2. If gold finger broken only: break reinforcement plate - the FFC rubber with blade open about 3-4 mm - tear out gold finger - the reinforcement plate with glue paste (be careful not to make too much of glue) Flexible Flat Cable, Flexible Flat Cable It is a kind of PET insulation material and very thin flat copper wire, tin plated by high-tech automation equipment production line pressing into new data cable, with soft, arbitrary bending fold, thickness thin, small volume, simple connection, convenient disassembly, easy to solve electromagnetic shielding (EMI), etc. You can choose any number of wires and spacing, make online more convenient, greatly reduce the volume of electronic products, reduce the production cost, improve production efficiency, the most suitable for surface between moving parts and the main board, PCB PCB, miniaturization of electrical equipment data transmission between cables. Common specification has 0.5 mm, 0.8 mm, 1.0 mm, 1.25 mm, 1.27 mm, 1.5 mm, 2.5mm, 2.54 mm etc. 2. Electric plating (gold plating) Gold plating is highly res