FreePic2Pdf_bkmk(国外英文资料).docVIP

FreePic2Pdf_bkmk(国外英文资料) Seal face - 19 Seal -18 Book name - 17 Edition right - 16 Editorial committee of the mechanical design handbook - 15 Publication description - 14 The new version of the preface - 13 Version 2: preface - 10 The first version of the preface is 9 Recorded -7 Article 5 the basic standard of the component design is 1 Chapter 1 drawing and graphic symbol 3 Technical drawing general rule 3 The 1.1 drawing format and format 3 The 1.1.1 drawing is three 1.1.2 drawing frame and size 4 1.1.3 picture partitions and pairs of symbols, direction symbols 4 The folding of the title bar, detail column, and duplicate diagram The placement, format, and size of the title bar are 5 Format 6 of the 1.2.2 detail column The folding method of the 1.2.3 copy is 7 13 1.3 ratio 1.3.1 terms and definitions 13 The 1.3.2 ratio series 13 Method 13 of the ratio of 1.3.3 The font and its provisions in CAD drawings are 13 The basic requirement for type-1.4.1 is 13 1.4.2 font example 14 Requirement 14 for font in CAD drawing Figure 1.5 drawing and its provisions in CAD drawing 17 The terms and definitions of the 1.5.1 diagram line are 17 The width, type and application of the 1.5.2 graph line are 17 Line 1.5.3 drawing 22 The structure of the graph line of the 1.5.4 CAD is 22 The basic provisions of the 1.5.5 guideline and the baseline are 22 The 1.6 section area representation is 26 The representation of the 1.6.1 generic section line is 26 The representation of 1.6.2 is 26 Picture method 26 The second Angle projection method and the third Angle projection method 26 2.2 view 29 2.2.1 view option 29 2.2.2 view classification and drawing method 29 The other representation of the 2.2.3 view is 30 Section 2.3 and section 34 Section 2.3.1 section 34 The 2.3.2 is shown in figure 39 Simplify the drawing and rule 41 Simplified picture method 41 The method of drawing is 41 The 2.5 dimensioning method is 46 The basic rule of 2.5.1 is 46 The general provisions of the 2.5.2 dimensioning me