中国石油北京《石油工程概论》第二阶段在线作业(国外英文资料).docVIP

中国石油北京《石油工程概论》第二阶段在线作业(国外英文资料) 14, spring 13, spring 13, China oil university, Beijing - the second phase of online homework Individual choice Question 1 The function of a technical casing is () A, protect the topsoil formation B, install the blowout preventer C, sealing oil, gas, water layer D, sealed off complex formation Problem 2: a large swell of Wells or blowout occurs in the () process A, orders with B, the drill C, drill D, normal drilling Question 3 which is more suitable for drilling hard formation A, milling tooth B, insert C, rectangle tooth D, triangular teeth Problem 4. Mud cake performance is best () A, low water loss and thin and dense B, loose C, the thicker the better D, high fluid loss Problem 5: drilling fluid is generally presented () A, the weak alkaline B, strong alkali C, weak acid, D, strongly acidic Problem 6 is the underbalanced drilling A, bottom-hole pressure is above ground pressure B, bottom hole pressure is equal to reservoir pressure C, bottom hole pressure is less than the reservoir pressure D, bottom hole pressure is equal to static fluid column pressure Problem number 7 is () A, the hole axis and the plumb Angle B, the tangent of the borehole axis and the Angle of the plumb line C, hole axis and horizontal Angle The tangent line of the hole axis and the Angle of the horizontal line The commonly used anticlinal drill is () A, A rigid manhole drill B, pendulum drill C, screw drill tool D, the turbodrill The term oil was first proposed by (). A, the book of changes B, the book of han. C, the book of dreams D) The book of the han. Problem 10 is usually the volume factor (). A, 5 B, 1, C, 1 D, 5 E . 10 Article 11 the mining data and the non-specific porosity in the literature refer to () A, absolute porosity B, effective porosity C, flow porosity D, fracture porosity E, matrix porosity The ratio of the volume of oil in the reservoir pore to the volume of pore volume is called (). A, residual oil saturation B, oil saturation C, resi