康佳T2993N彩电电源电路工作原理(国外英文资料).docVIP

康佳T2993N彩电电源电路工作原理(国外英文资料) Kangjia T993N color power circuit works principle Konka type T2993N color TV made composed of discrete component type transformer coupling parallel autonomous switch regulated power supply, and voltage to adapt to a wide range, perfect protection function, etc First, start and oscillation circuit When connected to the power switch S801, 220 v mains via mutual inductance filter L801, L802 filter high frequency noise in the grid by the rectifier stack after VD801 bridge rectifier, on both ends of the filter capacitor C809 produce about 300 v dc voltage. A route T803 primary 6-1 winding to the switch tube V823 collector. The other route starts the resistance R828 to the base of V823, which makes V823 the forward offset. V823 conduction, formed on the collector current in T803 primary winding induction electromotive force, the positive feedback T803 winding (9) foot corresponding R826 electromotive force is induced by the positive feedback circuit, feedback to V823 C820 base, then switch tube by the positive feedback process of avalanche, the state of saturated. After v823 saturation, the T803 pulse voltage is charged to C820, and as the C820 rechargeable current decreases, the switch tube v823 exits the saturation state and the collector current drops. Since the current in the inductance cannot be mutated, the T803 is inversed by the electromotive force, so the pulse voltage of the T803 (9) and the C820 is the voltage that is charged to the C820. After V823, the rectifier circuit of the T803 secondary winding begins to work and load the load. Two, constant current drive circuit Switch tube of positive feedback circuit is actually made up of two way feedback, one of the routing of regular positive feedback circuit R826, C820 its positive feedback for switch tube V823 quantity is fixed; The other positive feedback is made up of V820. Constant current drive circuit provides. During the V823 deadline, the positive feedback winding (9) is negativ