晶体管的封装外形(国外英文资料).doc

晶体管的封装外形(国外英文资料) The packaging of the domestic transistor There are dozens of shapes and sizes for domestic semiconductor transistors, which are represented by different letters and Numbers. Metal-encapsulated shapes are mainly divided into six types of shapes, including B ~ G, which can be divided into several sizes. The type B packaging structure is mainly used for the high frequency and low power transistor of silicon materials, and it is divided into various specifications (see table 5-20), and its shape and its alignment are shown in figure 5-20. Type B in the encapsulation of the transistor, some models (such as 3 dg56, 3 dg80, etc.) for the four pins, it is three pins (emitter, base, collector B E C) transistors one more ground in D. The type C packaging structure is mainly used for the high, low-frequency low-power transistor and the silicon switch pipe of germanium material. It also falls into a variety of specifications. Table 5-21 is the shape and size of the type C packaging transistor, which is the shape of the type C packaging transistor and the alignment of the pins. The type D package is classified into the d-1 and d-2, and the 5-22 is the shape and the size of the model, and the figure 5-22 is the shape and the alignment of the pins. The transistor with type E packaging is 3DA86, 3DK10 and so on, figure 5-23 is its size and its guide line. The F type packaging structure is mainly used for all kinds of low-frequency high-power transistors, and it is divided into five types of f-type ~ f-4, where the f-2 packaging structure is the most applied. Figure 5-24 is the form of the f-type packaging transistor and the drawing of the pins, and the table 5-23 is the shape and the size of each specification. The structure of the g-type is divided into g-1 ~ g-6, and its g-1, g-2 lead is round, g-3 ~ g-6 is flat. Table 5-24 is the shape and size of the type G packaging transistor. The structure of the structure transistor is a hexagon, with a fixed screw on the