更新日志(国外英文资料).doc

更新日志(国外英文资料) -- -15g - (*) modeling ideas and methods The contents of the directory are adjusted, and the completion section is missing video about 100 megabytes. New saddle shape surface shape video, 7 minutes 25M New twist tray modelling method video, 15 minutes 45M The basic instruction section Add the polygonal control mode of the new sample curve and apply video to 17 minutes 29M Updated with features of video, 7 minutes 17M The new screw (*) curved shape The new ipad has a high quality surface on the back of the ipad, creating a video to solve the curved curved surface of the square, with a 16-minute 58M Create video and 14 minutes 25M for the simple surface of the phones shell Product design section New 3D annotation features (3D annotations) create video, 4 minutes 5.5 M New perspective method video, walk into the model internal observation structure, 3 minutes 15M The assembly and application of new flexible parts, including the simulation of flexible motion animation (retractable simulation), 10 minutes 19M (*) part of the project In the new project graph, the coordinate system is manually annotated and automatically annotated, 4 minutes 8M The new project diagram transforms the configuration and output methods of DXF and DWG, solving common transformation problems such as color loss, character code, etc. In conversion, 28 minutes 52.4 M New use of pro/batch file batch conversion, batch process igs, step, DXF and printing, 13 minutes 21M (*) the institutional simulation section The new method of simulating assembly by the creation mechanism of the moving skeleton was 51M in 30 minutes (*) FAQ section The new proe versions and transformation instructions are explained by the different versions and date codes of proe, 8 minutes 9M The above is the capacity 15.5 G, as of 2010.05.06 Product design section New model to compare (model campare) instruction interpretation and application of the video, the two versions is obtained automatically by the software or t