暖通技术(国外英文资料).doc

暖通技术(国外英文资料) Isg65-160 (I) B station 2360.00 (tax and freight) The shortest distance from the pipe to the wall in the design manual is 110mm, but I see that the distance in the drawing is 100 and 60 [jiangnan shield line] Specification: the cold media tube needs to be connected to the external machine and then operates. The time of vacuum for vacuum is less than two hours, and one wind pipe is not less than 20 minutes. All welding points should be welded in the connection of the copper pipe and the ramified pipe. No copper pipe shall be welded to the copper pipe. In the process of welding must be within the copper pipe into nitrogen gas (nitrogen filled welding process), the copper pipe there is no air inside to avoid the carbon to produce welding makes the lining in formal into the compressor, resulting in failure during operation. The inner crane should consider the slope of five thousandths, and the side of the condensation water should be slightly lower, avoiding the condensation water. There are two kinds of materials: one is the ABS and the other is the aluminum vents. Comfortable 100 choose Qingdao hongtai cold copper tube. 1MPA is equal to 10 kilograms of pressure! This is done in real work, and this is the most common reduction in the pressure conversion of the valve. Light color is divided into warm and cool light, incandescent lamp is warm color light, energy-saving lamp is cool color light. Absolute roughness absolute roughness is a glossary of hydraulics, plumbing solid wall due to the effect of processing condition and operation is always more or less rough, rough highlight the average height is called absolute roughness. The low temperature floor radiant heating water temperature must be no greater than 60 ℃ Wuxi electricity price: 7:00 a.m. to 9:0.55 p.m., the other time is 0.35 yuan! The use area of the building is commonly about 85%, air conditioning area must be included in this area. 1 kw = 860 calories The heat transfer coefficient of 5cm cotton