机械维修(国外英文资料).doc

机械维修(国外英文资料) CNC lathe daily maintenance and maintenance In order to give full play to the function of nc lathe, reduce the occurrence of failure and prolong the mean time of failure of machine tool. CNC machine programming, operating and maintenance personnel must undergo specialized technical training, to have a mechanical processing technology, hydraulic, measurement, automatic control, such as knowledge, so as to fully understand and grasp the numerical control machine tools, to prepare for nc machine tool maintenance and maintenance work. The daily maintenance of CNC lathes and requirements CNC lathe operating personnel should strictly abide by the operation procedures and machine maintenance and maintenance system, strict properly according to the requirement of the machine tool and system specifications, the reasonable operation of machine tool, as far as possible to avoid improper operation impact machine tool use. The daily maintenance contents and requirements are shown in table 8-1. Table 8-1 CNC lathes daily maintenance content and requirements Check the contents and requirements of the serial number inspection period Guide rail lubricating oil box every day 1 check the oil, oil, in a timely manner to add lubricant, lubrication pump can start preview and stop in time. The X and Z axis will be used to clear the cutting and dirt of the guide surface every day, check whether the lubricating oil is full, and the surface of the guideway is damaged. Compressed air source to check the pressure of pneumatic control system every day, should be in normal range. Every day air filter, automatic water automatic air dryer Filter out the moisture in the clear water segregator in time, guarantee the normal work of the automatic air dryer. Daily pneumatic converters and supercharger oil surface to find the oil is not enough The main shaft lubrication constant temperature tank works normally, the oil is sufficient, the working area is suitable The balance pressure of the