水转印技术工艺介绍(国外英文资料).docVIP

水转印技术工艺介绍(国外英文资料) Water transfer technology, most of which are printed in print, such as film gravure, paper offset, etc. The printing of silk screen printing is more, can print some irregular surface, such as plastic bottle; The adaptation of the move is better than screen printing, but the scope is too narrow. The common denominator of these printing methods is the ability to use the flexibility of the seal to transfer the printed image from the pressure to the surface of the seal. Transfer printing technology belongs to the indirect printing, graphic transfer not by directly on the surface of substrates of printing, so the transfer of substrates can be shape and material sort very much, such as water transfer printing technology is to use water pressure will graphic lie on the surface, for transfer printing technology. Classification of water transfer technology According to the realization characteristics of water transfer, it can be divided into the water mantle transfer and water mark transfer. The water has been reprinted Only the water transfer printing, refers to the entire surface of the object, the true nature of the workpiece, can for the whole surfaces (3 d) design printing, this is its advantages; But the shortcomings are obvious, that is, flexible graphic carrier fully contact with the substrates inevitably occurred during tensile deformation, so, in fact, transfer to the graphic to meet the realistic degree on the surface of the object. Used for heat transfer of water transfer paper printing graphic mostly by the ink color piece of decoration color and simple repetition pattern composition, do not need to use delicate photosensitive diaphragm plate burning, Water transfer printing membrane is mostly made from good scalability of water-soluble film, used in the transfer of three-dimensional heat transfer film is difficult to do small text and hierarchical image transfer copy. 2. The water transfer printing Water mark on the heat transfer is the transf