理性、容性和阻性电阻(国外英文资料).docVIP

感性、容性和阻性电阻(国外英文资料) Circuit similar to the capacitive load, can make the current advanced voltage circuit power factor Generally take the load capacitance parameter of load, accord with the load voltage hysteresis current characteristics namely become a capacitive load. When charged and discharged, the voltage cannot be mutated. Its corresponding power factor is negative. The power factor of the corresponding perceptual load is positive. In the field of high frequency, is refers to the imaginary part load of the negative load. Capacitive load: compared with power supply, load current load voltage in advance a phase difference, the load for the capacitive load (e.g., to compensate the capacitive load). Similar capacitance in the circuit can reduce the current voltage and reduce the power factor of the circuit. Similar capacitance in the circuit can make the load current of the current load voltage a phase difference (compared to the power supply), reducing the power factor of the circuit. The general power supply control class, the given load, if not specified, is the power of view; That is the total capacity; It includes both reactive power and reactive power. While general inductive load instructions are often the size of the active power, such as fluorescent lamp, labeled 15 ~ 40 w fluorescent lamp, ballast consumed power of about 8 tile, considering actual use timer, induction switch to control it, with the 8 tile; The different product perceptual part, the magnitude of reactive power, can be calculated by the power factor given. In the hybrid circuit, the tolerance ratio is high, the circuit is capacitive and the other is perceptual. Normally, there is no pure load and pure capacity load in the electrical appliance. Because these two loads dont work hard. Only the pure inductive load or the pure capacity load is used in the compensation circuit. And because the vast majority of the load in addition to the impedance, mostly perceptual load, so the compensation wh