电子类的一些小问题(国外英文资料).docVIP

电子类的一些小问题(国外英文资料) A little problem with electronics. TXT A, resistance The resistance is expressed in R in the circuit, as in: R1 means resistance of 1. The main effect of resistance in the circuit is: shunt, current, partial pressure, offset, etc. 1, the parameter identification: the unit of resistance is the ohm (Ω), multiplying power units are: thousand Ω (K), megohm Ω (M), etc. The conversion method is: 1 megaohm = 1000 euro = 1000000 euro There are three methods of parameter labeling of resistance, namely the direct standard method, the color standard and the number standard. A, several standard method is mainly used in SMT circuit such as small volume, such as: said 47 472 x 472 Ω (4.7 K); 104 is 100 k B, color ring notation is the most used, for example: Four-color ring resistance five color ring resistance (precision resistance) The relationship between the position and the ratio of resistance is shown in the table: Color effective digit ratio allows for deviation (%) Silver/x0.01 plus or minus 10 gold/x0.1 plus or minus 5 black 0 + 0 / brown 1 x10 plus or minus 1 Red 2, x100 plus or minus 2 orange 3 x1000 / yellow 4 x10,000 / green 5 x100,000 plus 0.5 Blue 6 x1000000 plus or minus 0.2 purple 7 / x100000000 / white 9 x1000000000 / capacitance The capacitance is usually expressed in C in the circuit (for example, the C13 indicates a capacity of 13). Capacitors are made up of two pieces of metal, separated by insulating materials. The characteristics of a capacitor are mainly through direct communication. The size of the capacitance is said to store electrical energy, the size of the capacitance effect is called the capacitive reactance of ac signal, it is associated with the frequency of the ac signal and capacitance. Capacitive reactance XC = 1/2 PI c f (f is the frequency of the ac signal, capacitance c said) is commonly used in telephone with electrolytic capacitor, the kinds of ceramics capacitors, SMD capacitors, monolithic capacitors, tantalum