运输系统轨道的标准(国外英文资料).docVIP

运输系统轨道的标准(国外英文资料) The track should be on the circuit inspection system, the responsibility system, the record of the accident, the maintenance record and the technical history. All records should be filled in time, clearly, accurately and in custody. Quality standards A) narrow track railway line The serial number checks the item quality standard and allows the deviation remark The main transportation lines are generally transported The center line of the mm 1 orbital Monorail centerline comply with the design, the deviation is not more than design value plus or minus 50, center line of the double spacing not less than the design requirements, no more than 20 design values, the center of the dual-track and design position deviation is not more than 50 handover standard: inspection, for choosing hang line with the center line of the roadway design check, inoue center column shall prevail 2 grade with the actual elevation and the elevation of mm rail design elevation of the deviation of plus or minus 50, slope error within 50 meters of less than 1/1000 of the elevation difference within 50 meters of not more than 50 (including slope mine winch) over standard: underground measuring waist line to the rail surface offset, inoue in level measurement 3 The surface of the plane and the inner error is not greater than 2 and should not be bent The 4mm straight line is visually straight, with 10 strings and no more than 10. It curve visual coordinately, with 2 string quantity difference of adjacent versine: radius more than 50 m not more than 2, the radius of 50 meters, not more than 3 visual straight line, with 10 meters string of not more than 12 adjacent; The curve is visible to the circle, and the two strings are not more than three in the five meters before and after the joint. Take the positive value of the curve of the inside of the outside track with two meters long. In front of the 5 tracks, the high and low of the mm will be flat, with 10 strings no more than 10. Til