高压类理论考试题(2008年A3卷)(国外英文资料).docVIP

高压类理论考试题(2008年A3卷)(国外英文资料) If I can see my shadow, I think it must be sad, because I left my happiness in front. People who hurt others and themselves are always fuzzy on the edge of distance. The national electricians work permit examination High pressure class theory test (A3) One, a single choice question (in each of the alternatives, only one is the most conserved, with one point in each question, and the wrong choice is a zero, a total of 40 points.) High voltage distribution network is the distribution network of voltage (C) and above. A, 1KV B, 35KV C, 110KV The difference between the voltage and the variation of the voltage (B) is relative to the percentage of the voltage rating. The value of A, the voltage and the voltage, the maximum and the voltage minimum, the maximum voltage and the voltage rating The test project of transformer oil is generally test for pressure withstand, dielectric loss test and (B). A, lubrication test; B, simplify the experiment; C, sample test. The current in one windings is an empty current when the voltage is applied (A) at A time. A, rated power; B, any power; C, maximum power. The power of a transformer is the percentage of a transformer (C). A, total output and total input; B, output power and input total power; C, the output is reactive power and the input has the power. The transformer below 630kVA shall be inspected (A) after each closing and after the brake. A, once; B, twice; C, three times. The dividing line of transformer adjusting voltage is usually introduced from (C). A, A winding; B, low voltage winding; C, high voltage winding. When the transformer is running normally, the temperature of the parts is (C). A, unrelated, B, same, C, different. 9, when the transformer internal fault, produce gas, or oil tank oil level falls, can through to signal or trip circuit (A), in order to protect the transformer. A, gas relay B, cooling device C, moisture absorber 10, if ignore a transformer, secondary winding leakage resistan