GPS导航视频收发器INAP125T24 INAP125R24.pdfVIP

Application Note AN 100 Automotive Usage Order ID: AN_INAP_100 September 2008 Revision 1.3 APIX – Video Interface configuration Abstract APIX (Automotive PIXel Link) is a high speed serial link for transferring Video/Audio data in Cameras and Dis- plays in Automotive Applications such as Infotainment and Driver Assistance systems. The link supports a downstream data rate of up to 1 Gbit/s. In addition, APIX features a full duplex, bidirectional sideband channel over the same or a separate link. This link can be used to implement an independent control channel. This application note describes in detail the configuration of the video interface of the INAP125T12/24 APIX transmitter and INAP125R12/24 APIX receiver devices. System Architecture The APIX Interface devices provide an uni-directional parallel TTL video interface and a bi-directional sideband interface (Figure 1). The serial interconnection between transmitter and receiver device comprises a high speed differential down link and if required a lower speed differential up link. Figure 1: APIX parallel and serial interconnections Alternatively the upstream link can also be established via common mode signaling on the down link twisted pair. This allows an implementation of the entire link with only two wires, however impacting the EMI robustness of link, since the upstream sideband data is transferred as common mode signal. For automotive applications it is recommended to use the dedicated CML data link in upstream direction. September 8, 2008 Revision 1.3 AN_INAP_100