SplashzoneRiserInspectionTool摘要.PDFVIP

Splashzone Riser Inspection Tool Oceaneering Asset Integrity offers an innovative Different grades of brushes are available to give the Splashzone Riser Inspection Tool deployed using Rope best compromise between marine growth removal and Access Techniques. The tool consists of a telescopic avoidance of damage to the riser’s protective coating. arm, a tool head comprising of both cleaning and camera The camera incorporates a full pan and tilt capability; inspection facility, a power pack and a DVD recording / this combined with its ‘low light’ capability means that a editing suite. All components are fully certified for offshore General Visual Inspection (GVI) of ancillary items on the use in hazardous areas. jacket (anodes, clamps, etc.) can be carried out while the tool is deployed. Telescopic Arm There are also facilities to fit ultrasonic thickness checking The telescopic arm is fabricated from stainless steel box probes or Pulsed Eddy Current (PEC) probes to the tool section and attaches to the riser by means of a ‘V’ block head, these facilities being remotely controlled topside. and cargo straps. It extends to a length of 10 meters, giving a potential subsea inspection capability of up to 8 meters depending on the initial rigging position. A Lower Clamp Assembly hydraulically operated winch mounted at the top of the The tool head is held in position by means of the lower tool controls the extension and retraction of the arm. This clamp assembly. This clamp is interchangeable to movement is monitored by the operator via a remote accommodate riser diameters of 4 inch to 36 inch. The observation screen and digital gauge. cl