两相交错并联Boost变换器的研究及仿真.pdf

Journal of Electrical Engineering 电气工程, 2017, 5(1), 42-51 Published Online March 2017 in Hans. /journal/jee /10.12677/jee.2017.51006 Research and Simulation of Two-Phase Interleaving Boost Converter 1 2 1 Jiayi Chen , Pingjuan Niu , Shengwei Gao 1 Tianjin Key Laboratory of Advanced Technology of Electrical Engineering and Energy, Tianjin Polytechnic University, Tianjin 2 High Power Semiconductor Lighting Application Systems Engineering Research Center, Tianjin Semiconductor Lighting Technology Engineering Center, Tianjin Polytechnic University, Tianjin th th th Received: Mar. 7 , 2017; accepted: Mar. 24 , 2017; published: Mar. 28 , 2017 Abstract This paper introduces the basic principle and unique advantages of interleaving technology, and analyzes the efficacy of the two-phase interleaved boost converter in detail. In the control part of the circuit, a PI control strategy and digital hysteresis current control strategy are respectively adopted for the sake of comparison. Via MATLAB simulation, interleaving technology is shown to possess a number of important advantages compared to other methods, such as high frequency output voltage ripple with lower switching frequency, reducing current flowing through the switch tube, reducing switching loss, decreasing output voltage ripple, and output current ripple. Com- pared to the PI control method, the digital hysteresis current control method makes the perfor- mance of whole circuit is improved. Keywords Interleaving, PI Control, Digital Current Hysteresis Control, Simulation 两相交错并联Boost变换器的研究与仿真