CNC工程师工厂经验。txt(国外英语资料).doc

CNC工程师工厂经验。txt(国外英语资料) CNC engineer, plant experience. Txt.txt marriage is like wearing a cotton padded jacket for free. Its not easy to move, but its very warm. Falling in love is like peeling onions. Theres always a layer of tears going on. 1. define the responsibilities of the programmer responsible for the processing quality, processing efficiency, cost control and error control throughout the CNC manufacturing process of the mold. 2. programmers receive new mold, we must understand the requirements of the mold, the rationality of the mold structure, steel used before and after the mold, product tolerances requirements, beer plastic material. It is clear where the glue is, where the PL is, where it is touched and rubbed and where it can be avoided. 3. programmers receive the new model, in principle, the first time to open copper material list, fill out the list must first remove the copper, and can not be trimmed, but to have the size of the bottom of the hand to determine the copper standard code, spark size. The first batch of copper materials must be opened within 2 days, and all copper materials will be opened within 10 days, which can be divided into 4 bills of materials. 4. copper, rough, young and male construction drawings were completed with 2 construction drawings, spark spaces must be filled to the designated place. The workpiece can be in the old machine, please tick in the construction drawing machine and the corresponding column of machine tool, workpiece in high speed machining must be indicated in the note column. Not in the CNC construction drawings, fully articulate the direction of the workpiece, must be accompanied by a printed orientation map, can make people clear at a glance. The steel shall be in charge of the actual work, confirming the reference direction, the size of the workpiece and the machined surface. 5. when the steel material is open, the amount of Z under 0.5-0.7mm. When the copper material is open, the amount of Z under the k