CNC编程(国外英语资料).doc

CNC编程(国外英语资料) CNC Programming Notes 1., white steel knife speed can not be too fast. 2. copper work less coarse white steel, multi-purpose knife or alloy knife. 3., the workpiece is too high, should be layered with different length of knife open. 4. after the rough opening with machetes, knives application to remove excess material, ensure consistency is knife margin. The 5. plane using flat bottomed cutter, use less knife processing, in order to reduce the processing time. 6. copper angle, the angle to check on the size of R, and then determine how big a knife. 7. school table, plane quadrilateral angle Gong gong. 8., where the slope is integer, the use of slope knife processing, such as pipe position. 9., each process before doing, want to clear the previous process after processing the remaining margin, in order to avoid empty knife or processing too much and knife. 10. try to walk the knife is simple, such as shape, chamfer, single, less walk around the high. 11., walk WCUT, can walk FINISH, dont go, ROUGH. 12. shape knife, first light crude, to the place, the workpiece is too high, the first light side, and then light at the end. 13., setting tolerances reasonably to balance machining accuracy and computer computation time. Rough, margin tolerance is set to 1/5, knife, the tolerance is set to 0.01. 14., do a little more work, reduce the empty knife time. Do a little more thinking and reduce your chances of making mistakes. Do a little more reference line, auxiliary surface, improve processing condition. 15. establish a sense of responsibility, carefully check each parameter, avoid rework. 16. diligent in learning, good at thinking, and progress. Non planar milling, multi use knife, less side knife, do not be afraid of the knife; The knife clearance angle, sword finishing; Dont be afraid to make up the surface. Proper filling can improve the processing speed and beautify the processing effect Blank material hardness high: reverse milling better Rough material ha