GREE 格力空调 故障代码(国外英语资料).doc

GREE 格力空调 故障代码(国外英语资料) GREE KFR--50L/H610 fault code E1: the compressor current is too large, the compressor overheating, high exhaust temperature, module protection, should check whether the overload protector is broken and the compressor temperature sensitive package is short circuited. E2: antifreeze protection for indoor evaporators. E3: room temperature, temperature head, short circuit or open circuit. E4: indoor evaporator pipe temperature sensitive head short circuit or open circuit. E5: indoor and outdoor communication failure. GREE inverter fault display table LED1, LED2, LED3, D1, D2, D3, malfunction Green light, compressor operation Yellow light, outdoor environment, temperature package failure Red light, outdoor pipe temperature sensitive bag is faulty Flashing module protection Overload protection of flashing flashing compressor Green light, red light, yellow light, exhaust temperature, package failure Operation of bright compressor Blinking communication works normally, otherwise it is not normal There is a malfunction in the temperature sensor inside the flashing room LED1, LED2 and LED3 are outdoor fault display lights; D1, D2 and D3 are indoor display lights (in which the outdoor machine fault indication is indicated only when the compressor stops running) GREE E1 troubleshooting First of all, to determine whether the air conditioner is running for some time, failure or boot failure, to distinguish between system failure or circuit fault, the main aspects of the system: 1 emptying is not clean / new machine 2 excessive injection / repair 3 external machine High temperature / poor ventilation? Dirty block? The environment is bad Circuit: short circuit board in OVC and the zero line, such as to failure, the board / bad repair, change, if not failure, check whether the high-voltage switch turn-on switch should be conducted under atmospheric pressure , such as check, high voltage switch and OVC connection, such as barrier, repair of high-voltage sw