冲裁模具间隙(国外英语资料).docVIP

冲裁模具间隙(国外英语资料) The clearance between the blanking punch and the die has an important influence on the quality of the cutting cross section. In addition, the blanking clearance also affects the die life, the discharge force, the thrust force, the blanking force and the size accuracy of the blanking parts. Therefore, blanking clearance is a very important process parameter in blanking process and blanking die design. The The effect of gap size precision blanking part Punch size precision of cutting piece refers to the difference between the actual size and basic dimensions of blanking, the less the difference is, the higher accuracy of this difference, including deviation of the two aspects, one is the deviation relative to the blanking punch or die size is two, the manufacturing error of the die itself. The Blanking deviation relative to the punch and die size, is mainly derived from the die parts (blank) or unloaded from the punch (punching parts), elastic recovery caused by extrusion deformation, material by elongation, bending of the dome. Deviations may be positive or negative. The factors that affect this deviation are: punch, die clearance, material properties, shape and size of the workpiece. The main factor is the gap value between the convex and concave die. When the die gap is large, the material tensile action increases, punching after the end, due to the elastic recovery of the blanking dimension shrinkage to the real direction, the blank size is smaller than the die size, punching punch diameter greater than the diameter. The size is exactly the same as the size of the mold. When the gap is small, the material is affected by the extrusion pressure of the convex and concave die, so after the blanking, the elastic recovery of the material increases the size of the blanking piece and the hole diameter of the punch becomes smaller. The magnitude of the change is related to the properties of the material, the thickness, and the direction of the roll. The mat