应用PKPM软件前进无梁楼盖结构(国外英语资料).doc

运用PKPM软件进行无梁楼盖结构(国外英语资料) The design of flat slab structure using PKPM software: anonymous recommended: syb106 the recommended reading all the papers: 3: 5547 upload time: 2004-12-03 file size: 14495 bytes Abstract: girderless floor structure system and plate structure, which is relative to the beam slab structure system. In our country, the slab structure system without beam is a new construction technology which is developing very fast in recent years. Compared with the traditional multi ribbed beam structure, it has the advantages of good integrity, large construction space and high efficiency. Moreover, the seismic effect of buildings with flat slab floor system is much smaller than that of tall buildings with beams and slabs. In the aspect of construction, the building with no beam floor structure has the advantages of simple construction formwork, convenient binding of steel bars on the floor and convenient installation of the equipment, thus greatly improving the construction speed. Therefore, the use of non beam floor structure has obvious economic and social benefits. Key words: PKPM structure, software, floor design For the structure without beam floor, the design calculation is mainly divided into two parts: the spatial structure analysis of the whole structure and the analysis and calculation without Liang Lougai. At present, PKPM series structure design software has already had the mature analysis method to these two aspects design. Now lets make some introductions: Whole 3D calculation of I. non beam floor The overall calculation of the non beam floor structure can be carried out through TAT software or SATWE software in PKPM software. Of course, the modeling of the two software in the three-dimensional calculation of the non beam floor is different: In the TAT software, for the slab less floor structure, since there is no beam and column connection, we must generally in accordance with the provisions of the specification to simplify the slab as a two-