DS807鞋面定型机三维设计及运动学动力学仿真的分析.pdfVIP

摘 要 随着科学技术的不断发展，降低生产成本、节约时间，制造出最好的产品是各大企业一 直寻求的目标。虚拟样机技术可以简化机械产品的设计过程，缩短产品的开发周期和降低开 发费用，提高产品的性能，获得最优化和创新产品。本文利用这种技术，在对市场进行充分 分析和研究的情况下，提出了 DS807 鞋面定型机。这种鞋面定型机采用双工位加工，加热与 冷却在不同的工位，因此提高了鞋面定型的效率、鞋面的美观和质量。 本文根据鞋的形状和生产实际确定整个机体的结构。在保证 DS807 鞋面定型机有良好的 定型能力和较高生产率前提下，对机构及工装夹具进行了设计。由于气压传动动作迅速、反 应快、维护简单、工作介质清洁，不存在介质变质等问题，因此选择了气压传动作为动力 源，采用了正确合理的气动控制回路，设计了气动逻辑控制系统，确定了空气压缩机和气缸 参数，绘制了整机的二维零件图和装配图。在机构设计的基础上利用三维设计软件 Pro/E 软 件对 DS807 鞋面定型机的所有零部件进行三维实体设计。将零件按要求的约束条件或连接方 式装配在一起，形成了一个完整的产品或机构装置，在此过程中不断地检查零件图，使每个 零件都能满足装配关系。 最后通过 PRO/E 三维复杂形体参数化建模功能与 ADAMS 强大的机械系统仿真功能相结合 对定型机中的压料装置进行了仿真，验证了机构是否能够实现所需的运动以及所选参数值是 否能满足机构的运动要求。 关键词： 机构设计；虚拟技术；参数化建模；运动学仿真 I Abstract With the development of science and technology, to reduce the cost of the products, to save time and to create the best products have sought to target for each enterprise. Virtual prototyping technology is a new designing method, it is a digital designing method based on the simulated models of the products. By the method, the design process of the mechanical products is simplified, the development cycle of the products and the cost of products development is reduced, and the performance of the products is improved. DS807 machine applied the method, which is used for forming vamp, is presented in this paper. The kind of the machine is double-station, which are heating and cooling what happened in different station. Therefore, the efficiency of forming vamp and the beautiful and quality of the vamp are improved. In this paper, according to the shape of shoe and combining with practices, the structure of the whole body is determined. The mechanism and jig and fixture are devised on condition that DS807 machine for forming vamp have nice the forming ability and higher productivity. Since pneumatic tran